Overview
The L-IOB I/O Controller is a family of Input/Output programmable controllers featuring various I/O configurations. Based on LOYTEC’s 32-bit L-CORE platform, the L-IOB I/O Controllers provide first class performance and a wide area of applications.
Programmable
The built-in PLC functionality makes the L-IOB I/O Controllers a good fit for various control applications in building automation. Tthe L-IOB I/O Controllers are programmed with L-LOGICAD in 61131-3. The same application libraries and application programs can be used on both platforms.
LonMark Models
The LIOB-FT I/O Controllers and LIOB-IP852 I/O Controllers communicate in the LONMARK sytem via network variables over TP/FT-10 or Ethernet/IP-852 respectively. They come with a freely configurable network variable interface and offer up to 256 address table entries.
LIOB-FT I/O Controller
LIOB-18x I/O Controllers are compact, programmable automation stations for LONMARK systems with physical inputs and outputs.
LonMark TP/FT-10 Channel
LIOB-18x I/O Controllers communicate via twisted pair over a TP/FT-10 channel in the LONMARK system. LIOB-18x I/O Controllers offer extended features such as local alarming (SNVT_alarm and SNVT_alarm_2) and local scheduling.
Available Input/Output configurations for this family products:
LIOB-180
LIOB-TP/FT-10 I/O Controller: 8 UI, 2 DI, 2 AO, 8 DO (4xRelay 6A, 4xTriac 1A@24-230VAc)
LIOB-181
LIOB-TP/FT-10 I/O Controller: 8 UI, 12 DI
LIOB-182
LIOB- TP/FT-10 I/O Controller: 6 UI, 6 AO, 8 DO (Relay 6A)
LIOB-183
LIOB- TP/FT-10 I/O Controller: 6 UI, 6 AO, 5 DO (4xRelay 16A, 1xRelay 6A)
LIOB-184
LIOB- TP/FT-10 I/O Controller: 7 UI, 4 AO, 7 DO (5xRelay 6A, 2xTriac 1A@24-230Vac), 1 Pressure Sensor (0-500Pa)
Local Operation and Override
The modules contain a 128x64 display with backlight showing device and data point information. A jog dial is used for local operation by navigating through detailed information on the display and for operating and overriding of data points.
The configuration of the L-IOB I/O Contollers is done with the L-INX Configuration Tool.
L-IOB Controllers provide removable, vibration-proofed terminal screws with a clamping yoke connection in a 5.08 mm raster for wiring. These terminals can accommodate diameters from 0.2–2.5 mm² (26–12 AWG).
Features LIOB-TP/FT-10 I/O Controller:
• Automation station with physical input and outputs
• IEC 61131-3 programmable with L-LOGICAD
• 128x64 graphic display with backlight
• Local access to information about device status and data points in clear text and symbols
• Manual operation using the jog dial
• Complient with CEA 709 and ISO/IEC 14908-2 standard (LonMark system)
• SNVT-based interface for integration on the LonMark TP/FT-10 channel
• NV interface can be freely defined
• Up to 512 address table entries (ECS mode)
• LNS plug in for the device configuration in the LonMark system
• Math objects to execute mathematical operations on data points
• LonMark Alarming with nvoAlarm (SNVT_alarm) and nvoAlarm_2 (SNVT_alarm_2)
• Local Scheduling (no real-time clock, system time is set via SNVT_time_stamp)
Installation
The dimensions of the devices are presented on the drawing above.
Integration
Features of the I/O:
The Universal Inputs (UI) are corresponding to Class 1 with 1% accuracy, input voltage range of 0 to 30V.
Types of input:
• Binary Input:
o Input impedance: 10 KOhm
o Sampling rate: 10 mSec
• Voltage metering 0-10V
o Input impedance: 10 KOhm
o Sampling rate: 1 Sec
• Current Loop 4-20mA
o Input impedance: 249 Ohm
o Sampling rate: 1 Sec
• Resistance Measurement:
o Input impedance: 10 KOhm
o Sampling rate: 1 Sec
The Digital Inputs (DI) and Counter Inputs (S0-Pulse) are fast binary inputs, which can also be used as counter inputs (S0), corresponding to Class 1 with 1% accuracy, input voltage range of 0 to 30V.
• Input impedance: 10 KOhm
• Sampling rate: 10 mSec
• S0-Pulse: Positive switching
Analog Output (AO)
• Resolution: 10 bit
• Signal range: 0-10V, optional 0-12V
• Current: max. 10mA (short circuit proofed)
• Input impedance: 1.2 KOhm for linear output
Digital Output (DO)
• Relay Output:
o Switching capacity: 6A, 250Vac resp. 30Vdc
16A, 250Vac resp. 30Vdc
• Triac Output
o Switching capacity: 1A, 24 to 230Vac
Pressure Sensor
• Differential pressure sensor with 2 hose connectors:
o 0-500 Pa
o 3/16” (4,8mm) hose connector
| Passatge Garrotxa, 6 | 08830 Sant Boi de Llobregat | Barcelona | Spain | Tel.: +34 93 652 55 21 | Fax +34 93 652 55 22