Overview
The LIOB I/O products are a family of Input/Output devices featuring different I/O setups. The modules provide first class performance and extensive resources thanks to the 32 bit microcontroller embedded on them.
The family of LIOB-BIP I/O Modules offer network connectivity to an Ethernet/IP with BACnet/IP protocol BTL certified. They support up to 200 BACnet server objects to access the L-IOB local I/O. All LIOB-BIP I/O Modules feature a built-in Web Server for device management and configuration. In addition they feature an embedded OPC XML-DA server which can host up to 200 data points that can be accessed through Web services.
Input/Output configuration family products:
LIOB-550
LIOB-BACnet IP I/O Module: 8 UI, 2 DI, 2 AO, 8 DO (4xRelay 6A, 4xTriac 1A@24-230VAc)
LIOB-551
LIOB-BACnet IP I/O Module: 8 UI, 12 DI
LIOB-552
LIOB- BACnet IP I/O Module: 6 UI, 6 AO, 8 DO (Relay 6A)
LIOB-553
LIOB- BACnet IP I/O Module: 6 UI, 6 AO, 5 DO (4xRelay 16A, 1xRelay 6A)
LIOB-554
LIOB- BACnet IP I/O Module: 7 UI, 4 AO, 7 DO (5xRelay 6A, 2xTriac 1A@24-230Vac), 1 Pressure Sensor (0-500Pa)
The modules contain a 128x64 display with backlight showing device and data point information. A jog dial is used for local operation by navigating through detailed information on the display and for operating and overriding of data points.
The configuration of the L-IOB I/O Modules is done with the L-INX Configuration Tool. L-IOB Modules provide removable, vibration-proofed terminal screws with a clamping yoke connection in a 5.08 mm raster for wiring. These terminals can accommodate diameters from 0.2–2.5 mm² (26–12 AWG).
Features LIOB-BIP I/O Module:
• Physical Inputs and Outputs
• BACnet/IP connectivity via Ethernet
• Supports BACnet server objects (max. 200)
• Integrated OPC XML-DA Server (200 DPs max.)
• 128x64 display with backlight
• Local access to information about device status and data points
• Integrated Web server for device configuration and management
• Manual operation using the jog dial
• Configuration through L-INX configuration tool
• Removable terminal with a clamping yoke connection to accommodate diameters from 0.2-2.5 mm² (26-12 AWG)
• Simple device replacement in L-INX mode without software tool
• BTL Certified
Installation
The dimensions of the devices are presented on the drawing above.
Integration
Features of the I/O:
The Universal Inputs (UI) are corresponding to Class 1 with 1% accuracy, input voltage range of 0 to 30V.
Types of input:
• Binary Input:
o Input impedance: 10 KOhm
o Sampling rate: 10 mSec
• Voltage metering 0-10V
o Input impedance: 10 KOhm
o Sampling rate: 1 Sec
• Current Loop 4-20mA
o Input impedance: 249 Ohm
o Sampling rate: 1 Sec
• Resistance Measurement:
o Input impedance: 10 KOhm
o Sampling rate: 1 Sec
The Digital Inputs (DI) and Counter Inputs (S0-Pulse) are fast binary inputs, which can also be used as counter inputs (S0), corresponding to Class 1 with 1% accuracy, input voltage range of 0 to 30V.
• Input impedance: 10 KOhm
• Sampling rate: 10 mSec
• S0-Pulse: Positive switching
Analog Output (AO)
• Resolution: 10 bit
• Signal range: 0-10V, optional 0-12V
• Current: max. 10mA (short circuit proofed)
• Input impedance: 1.2 KOhm for linear output
Digital Output (DO)
• Relay Output:
o Switching capacity: 6A, 250Vac resp. 30Vdc
16A, 250Vac resp. 30Vdc
• Triac Output
o Switching capacity: 1A, 24 to 230Vac
Pressure Sensor
• Differential pressure sensor with 2 hose connectors:
o 0-500 Pa
o 3/16” (4,8mm) hose connector
| Passatge Garrotxa, 6 | 08830 Sant Boi de Llobregat | Barcelona | Spain | Tel.: +34 93 652 55 21 | Fax +34 93 652 55 22